Last data update: May 06, 2024. (Total: 46732 publications since 2009)
Records 1-4 (of 4 Records) |
Query Trace: Rayyan N[original query] |
---|
Structural basis of the American mink ACE2 binding by Y453F trimeric spike glycoproteins of SARS-CoV-2
Ahn H , Calderon BM , Fan X , Gao Y , Horgan NL , Jiang N , Blohm DS , Hossain J , Rayyan NWK , Osman SH , Lin X , Currier M , Steel J , Wentworth DE , Zhou B , Liang B . J Med Virol 2023 95 (10) e29163 Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) enters the host cell by binding to angiotensin-converting enzyme 2 (ACE2). While evolutionarily conserved, ACE2 receptors differ across various species and differential interactions with Spike (S) glycoproteins of SARS-CoV-2 viruses impact species specificity. Reverse zoonoses led to SARS-CoV-2 outbreaks on multiple American mink (Mustela vison) farms during the pandemic and gave rise to mink-associated S substitutions known for transmissibility between mink and zoonotic transmission to humans. In this study, we used bio-layer interferometry (BLI) to discern the differences in binding affinity between multiple human and mink-derived S glycoproteins of SARS-CoV-2 and their respective ACE2 receptors. Further, we conducted a structural analysis of a mink variant S glycoprotein and American mink ACE2 (mvACE2) using cryo-electron microscopy (cryo-EM), revealing four distinct conformations. We discovered a novel intermediary conformation where the mvACE2 receptor is bound to the receptor-binding domain (RBD) of the S glycoprotein in a "down" position, approximately 34° lower than previously reported "up" RBD. Finally, we compared residue interactions in the S-ACE2 complex interface of S glycoprotein conformations with varying RBD orientations. These findings provide valuable insights into the molecular mechanisms of SARS-CoV-2 entry. |
Lithium-ion battery explosion aerosols: Morphology and elemental composition
Barone TL , Dubaniewicz TH , Friend SA , Zlochower IA , Bugarski AD , Rayyan NS . Aerosol Sci Technol 2021 55 (10) 1183-1201 Aerosols emitted by the explosion of lithium-ion batteries were characterized to assess potential exposures. The explosions were initiated by activating thermal runaway in three commercial batteries: (1) lithium nickel manganese cobalt oxide (NMC), (2) lithium iron phosphate (LFP), and (3) lithium titanate oxide (LTO). Post-explosion aerosols were collected on anodisc filters and analyzed by scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). The SEM and EDS analyses showed that aerosol morphologies and compositions were comparable to individual grains within the original battery materials for the NMC cell, which points to the fracture and ejection of the original battery components during the explosion. In contrast, the LFP cell emitted carbonaceous cenospheres, which suggests aerosol formation by the decomposition of organics within molten microspheres. LTO explosion aerosols showed characteristics of both types of emissions. The abundance of elements from the anode, cathode, and separator in respirable aerosols underscored the need for the selection of low-toxicity battery materials due to potential exposures in the event of battery thermal runaway. Copyright © This work was authored as part of the Contributor's official duties as an Employee of the United States Government and is therefore a work of the United States Government. In accordance with 17 USC. 105, no copyright protection is available for such works under US Law. |
Experimental study on thermal runaway and vented gases of lithium-ion cells
Yuan L , Dubaniewicz T , Zlochower I , Thomas R , Rayyan N . Process Saf Environ Prot 2020 144 186-192 Lithium-ion (Li-ion) batteries have become more prevalent in mining to power a wide range of devices from handheld tools to mobile mining equipment. However, the benefits associated with using Li-ion batteries may come with a higher risk of a fire or an explosion. The major cause for a Li-ion battery fire is thermal runaway. If unmitigated, a thermal runaway can lead to cell rupture and the venting of toxic and highly flammables gases. Those flammable gases can cause a fire or explosion if ignited. In this study, researchers from the National Institute for Occupational Safety and Health (NIOSH) conducted experiments to monitor the heating of a Li-ion cell with different battery chemistries using an accelerating rate calorimeter (ARC). Inside the ARC, the cell was exposed to increasing temperatures until it reached a thermal runaway. Samples of vented gases after the thermal runaway were collected and analyzed using a gas chromatograph. Major gas components were identified, and their concentrations were measured. The results of this study can be useful in reducing the hazard of Li-ion battery fires. |
Influence of specific surface area on coal dust explosibility using the 20-L chamber
Zlochower IA , Sapko MJ , Perera IE , Brown CB , Harris ML , Rayyan NS . J Loss Prev Process Ind 2018 54 103-109 The relationship between the explosion inerting effectiveness of rock dusts on coal dusts, as a function of the specific surface area (cm2/g) of each component is examined through the use of 20-L explosion chamber testing. More specifically, a linear relationship is demonstrated for the rock dust to coal dust (or incombustible to combustible) content of such inerted mixtures with the specific surface area of the coal and the inverse of that area of the rock dust. Hence, the inerting effectiveness, defined as above, is more generally linearly dependent on the ratio of the two surface areas. The focus on specific surface areas, particularly of the rock dust, provide supporting data for minimum surface area requirements in addition to the 70% less than 200 mesh requirement specified in 30 CFR 75.2. © 2018 |
- Page last reviewed:Feb 1, 2024
- Page last updated:May 06, 2024
- Content source:
- Powered by CDC PHGKB Infrastructure